TOP 10 km/MJ
Pos Name km
MartinWeb 1298
brumm 1264.5
madspock 1037.3
4 hajoco 890.1
5 Triple 814.4
6 Happy 791.1
7 Atchoum 752
8 Bernie 736.3
9 Tinaa 689
10 Cruella 671.7

KWTremote

Forum

Thema ohne neue Antworten

user setting in kwt2 with racer s


Autor Nachricht
Verfasst am: 17.12.2014 [12:00]
pika
Themenersteller
Dabei seit: 15.12.2014
Beiträge: 24
hi after some info
ive set up kwt2 to use with my racer s for me and my wife so I set my user profile as P1 in settings and hers in P2 in settings but when pressing apply it says that when using P1 -P4 setting the equipment being used should be set to maximum setting ie 600 watt? I presume.
how do I set this on the bike as its connected threw Bluetooth as if I set before connecting im sure it defaults back to say 25watts.
also my wife prefers the automatic gear change I know where to set the setting but should I leave it to change at 135watt or set higher or lower?
also one last thing did I not read the racer s was supposed to be up to 1000 watts? ive installed the latest firmware update.

thanks mark
Verfasst am: 17.12.2014 [12:44]
Wolfgang
Administrator
über 100 kmüber 500 km
870 km
Dabei seit: 09.02.2009
Beiträge: 2560
Hi,
Your Racer S has no user storage.

So the Setting P1 or P2 is ignored.

The message is only for devices with user storage and an max power off 600 W.

The automatic watt can changed during Training. So you set here only the starting value.

The Racer S can 600 W in RPM independant mode and 1000 W in dependant mode.

KWT only uses the independant mode.

Verfasst am: 17.12.2014 [14:12]
pika
Themenersteller
Dabei seit: 15.12.2014
Beiträge: 24
"Wolfgang" wrote:

Hi,
Your Racer S has no user storage.

So the Setting P1 or P2 is ignored.

The message is only for devices with user storage and an max power off 600 W.

The automatic watt can changed during Training. So you set here only the starting value.

The Racer S can 600 W in RPM independant mode and 1000 W in dependant mode.

KWT only uses the independant mode.


Thanks Wolfgang
When you say it has 1000 w in dependant mode how do I set it that high because if I'm using the racer s i
with out world tours or the kett fit app and just using the bike display panel it only goes up to 600 as it only has a 3 digit display
Verfasst am: 17.12.2014 [14:25]
Wolfgang
Administrator
über 100 kmüber 500 km
870 km
Dabei seit: 09.02.2009
Beiträge: 2560
the 1000 W mode cannot be controlled with Watt. You have to control it with brake Levels.

Please read the Manual because I never used it.

Verfasst am: 17.12.2014 [14:37]
pika
Themenersteller
Dabei seit: 15.12.2014
Beiträge: 24
"Wolfgang" wrote:

the 1000 W mode cannot be controlled with Watt. You have to control it with brake Levels.

Please read the Manual because I never used it.


How do I do the brake levels then?
I've read the manual for what help that is as it doesn't mention it at all or at least it doesn't in the manual that came with my racer s
Verfasst am: 17.12.2014 [15:30]
Wolfgang
Administrator
über 100 kmüber 500 km
870 km
Dabei seit: 09.02.2009
Beiträge: 2560
I don't know. you can go on http://www.kettler.net and search for a newer Manual for your current Firmware Version.

It's also possible that this mode is only available in S-Fit app.






 

 

KETTLER

     

KETTLER WORLD TOURS 2.0